- November 25, 2025
Use our form to estimate the initial cost of renovation or installation.
REQUEST A QUOTE
Professional, Safe & Code-Compliant EV Charger Setup for Your Home
The demand for electric vehicles continues to rise across California, and so does the need for fast, reliable, and safe home charging solutions. At Dan Matthews Electric, we specialize in Level 2 EV charger installation for homeowners in Morgan Hill, Gilroy, San Jose, Hollister, and surrounding areas, delivering expert electrical service backed by more than 7 years of residential electrical experience and 35 years of advanced electronics troubleshooting and design work.
Whether you purchased a Tesla, Ford, Chevy, Toyota, Hyundai, Rivian, or any other EV model, a professionally installed Level 2 charger is the best way to ensure you can charge faster, safer, and more efficiently every day.
While Level 1 chargers plug into a standard 120V outlet, they charge extremely slowly—often taking 20–40 hours for a full charge. A Level 2 charger uses a 240V dedicated circuit, allowing most vehicles to fully charge in 4–8 hours.
A Level 2 home charger provides:
To maximize performance and safety, Level 2 chargers must be installed by a licensed electrician—especially when added to older or heavily loaded electrical panels.
Every EV charger installation is different, depending on your home’s electrical capacity, parking layout, and charging needs. As a licensed California electrical contractor, Dan Matthews Electric provides full-service EV charging setup, including:
We inspect your existing electrical panel to determine if it has enough capacity for an additional 240V circuit. If upgrades are needed, we’ll provide safe, code-compliant solutions.
Level 2 chargers require a properly sized breaker, dedicated wiring, and secure conduit. We handle every part of the installation professionally and safely.
Whether your charger plugs into a NEMA outlet or needs to be hardwired, installation is completed to meet all state and local codes.
We mount your wall charger in the ideal location for convenience, safety, and long-term reliability.
All work performed adheres to:
We walk you through:
This work is personally performed or supervised by Dan Matthews, a licensed California electrician (License #102855) with decades of experience in electrical troubleshooting, circuit design, and high-precision electronic systems.
With a long history of professional residential work and a background in advanced electronics, you get a rare combination of technical expertise, hands-on skill, and reliable customer service.
Many homeowners aren’t sure if their home’s electrical system can handle an EV charger—and that’s okay. A professional evaluation answers questions like:
You’ll receive clear, honest recommendations—never upselling, never unnecessary work.
Proudly serving homeowners in:
Fast response times and dependable scheduling ensure your installation is completed on time and correctly the first time.
Contact Dan Matthews Electric today for a free estimate or to schedule your installation.
With 7 years of residential electrical experience and over 35 years of advanced electronics troubleshooting and design, Dan delivers precise, dependable workmanship on every project. As a licensed California electrician (License #102855) and FCC General Class License holder, he personally performs or supervises all work to ensure safety, code compliance, and customer satisfaction
Yes. Level 2 EV charger installation requires a dedicated 240-volt circuit, proper load calculations, grounding, and code-compliant wiring. In California, EV charger installation must be performed by a licensed electrician to meet safety requirements and avoid voiding equipment warranties. Dan Matthews Electric is fully licensed (#102855) and ensures your installation meets all NEC and local code regulations.
Most residential installations take 2–4 hours, depending on factors like panel location, wiring requirements, and whether a new dedicated circuit or panel upgrade is needed. More complex installations—such as long conduit runs or older panels—may take slightly longer. After an evaluation, Dan will give you an exact time estimate.
A Level 2 charger typically requires a 40–60 amp dedicated breaker.
Dan Matthews Electric performs a full load calculation to determine if your panel can safely support an EV charger. If needed, we can add a subpanel or offer electrical panel upgrades so your home meets all safety and code requirements.
Costs vary depending on:
Distance from panel to charger
Existing electrical capacity
Required wiring or conduit
Charger model
Whether trenching or wall penetration is needed
On average, most installations range from $450 to $1,200, but every home is different. Dan offers fair, transparent pricing with no hidden add-ons.
Absolutely. We install all major brands, including:
Tesla Wall Connector, ChargePoint, JuiceBox, Blink, Siemens, Emporia, Wallbox, and all UL-certified EVSE units. If you’re unsure which charger to buy, Dan can help you select the best model for your home and vehicle.
Most California cities require a permit for Level 2 charger installation to ensure the work complies with electrical and safety codes. Dan Matthews Electric handles all code requirements and will guide you through the process if your jurisdiction requires a permit.
Level 1 chargers use a standard 120V outlet and provide 2–5 miles of range per hour.
Level 2 chargers use a 240V dedicated circuit and deliver 20–44 miles of range per hour.
Level 2 charging is the ideal choice for overnight home charging and long-term EV battery health.
Yes — many EV chargers are designed for indoor or outdoor use. Dan installs weather-rated conduit, waterproof enclosures, and proper GFCI protection to ensure safe charging in California’s climate.
Charging an EV will increase electricity usage, but it is still far cheaper than gas. Many homeowners save hundreds of dollars per year. Dan can also help you explore time-of-use (TOU) rates to reduce charging costs.
We provide professional EV charger installation throughout:
Morgan Hill, Gilroy, San Jose, Hollister, and surrounding Santa Clara County communities.
Dan Matthews Electric is a licensed, locally owned electrical service provider serving Morgan Hill, Gilroy, San Jose, Hollister, and surrounding areas. With over 7 years of hands-on residential electrical experience and 35+ years of electronics troubleshooting expertise, we are committed to delivering safe, reliable, and code-compliant work. Every project is handled personally or directly supervised by Dan to ensure quality, honesty, and customer satisfaction.